Product : DC-5300

To update this camera firmware, you will need to have
1. The new firmware file from Premier.

without Date on the picture
http://mitglied.multimania.de/mcintyrespace/firmware/firmware033od.zip



2. One SD card.
3. One card reader.

Please follow the steps below to perform the update process:
1. Prepare a formatted and empty SD card.
2. Insert a SD card to the card reader. Copy the firmware file (file name should be "dcj01.bin"(dcj01x.bin for Sharp CCD)) into the SD card. Make sure the new firmware file is copied to the SD card.
3. Insert the SD card into the camera.
4. Plug in the AC adapter into the camera.
5. PRESS "UP" & "Power" button at the same time then wait for update process
6. When LED is green blink, it mean update ok.
7. Reformat the SD card if you want to use it again.

Note: Don’t remove the power source during firmware update procedures.

Premier will not be responsible to any damage caused by end-users while updating firmware by themselves. Always come to Premier’s service center for processing the updating.